Beschreibung
Einleitung
JOEO ozone aging test chamber through the simulation and enhancement of ozone conditions in the atmosphere, to study the impact of ozone on rubber, and then determine and evaluate rubber resistance to ozone and aging methods, take effective anti-aging measures to improve the service life of rubber products. JOEO Ozone test chamber can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulation bushing, etc. The test pieces were exposed to the airtight air in the ozone chamber with no light, constant ozone concentration and constant temperature at a predetermined time, and the surface cracks and other properties of the test pieces were observed to evaluate the ozone aging resistance of the rubber. JOEO Ozone test chamber is widely used in product quality control in measurement quality control. Rubber and plastics; Automobile production; Wire and cable; Packaging materials; Instruments and meters; Medical equipment; Civil nuclear energy; Civil aviation; Institutions of higher learning; Research laboratories; Inspection arbitration, and technical supervision departments such as rubber products
Funktionen
- Edelstahl innen und außen für den Ozonprüfraum
- Hergestellt aus Eisen mit Pulverbeschichtung auf der Außenseite
- Langlebiger Ozongenerator (Ozonlabor)
- Das Dämmmaterial ist hochdichte Glasfaserbaumwolle
- Die Unterseite ist ein universelles rundes Rad und feste Füße
- Das Fenstermaterial besteht aus mehrschichtigem gehärtetem Glas, und das Innere ist leitfähig mit Spänen
- Öldruckschutz für Kältekompressoren
- Fehlendes Phasensperrschutzsystem. Überlastschutz des umlaufenden Lüftermotors
Parameter
Modell |
OAC - 80 |
OAC - 408 |
OAC - 800 |
Innenmaß BxHxT (mm) |
400x500x400 cm |
600x850x800 cm |
1000x1000x800 cm |
Außenmaß BxHxT (mm) |
900x1650x950 cm |
1200x1950x1350 cm |
1600x2000x1450 cm |
Temperaturbereich |
( RT + 15°C ) ~ + 65°C |
Genauigkeit der Steuerung
of Temperature |
±0.5°C |
Gleichmäßigkeit der Verteilung
der Temperatur |
±0.2°C |
Analytische Genauigkeit
of Temperature |
0.1°C |
Ozonkonzentration (pphm) |
1 ~ 1000 Kann nicht einstellbar sein |
Abweichung von
Ozonkonzentration |
≤10% |
Ozon-Generator |
Typ mit geräuschloser Entladungsröhre |
Innen- und Außenmaterial |
Material des Innenkastens ist Edelstahl SUS 304#,
des Außenkastens aus Edelstahl oder SEE-kaltgewalztem Stahl mit Lackbeschichtung |
Isolationsmaterial |
Polyurethan-Hartschaum/ superfeine Glasfaser-Baumwolle |
Sicherheit |
Leckage-, Kurzschluss- und Überstromschutz |
Macht |
Wechselstrom 220 V; 1∮ 3 Zeilen; 50/60 Hz |