Anwendung
JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom environmental stress screening of components and board level electronic components. The carrier basket transfers loads between hot and cold zones in two - or three-zone configurations, and is widely used in automotive, electronic and electrical, aerospace, communication equipment, medical equipment and other industries.
Erfüllen Sie Standards
Beschreibung
JOEO Horizontal thermal test chamber are available in a variety of configurations and are the right solution for all thermal shock test requirements for large or batch products.
Two zones, single capacity (-2)
(One hot zone and one cold zone)
The product in the test moves through a carrying basket, alternating between hot and cold zones.
Two-zone Dual Capacity (-2D)
(Two hot zones and one cold zone)
In a two-zone, two-capacity system, the cold zone is always in use, which helps to improve system efficiency.
Three zones, single capacity (-3)
(One hot zone, one normal zone and one cold zone)
In the horizontal three zones, the product moves through the carrier basket between the cold zone and the normal temperature zone, and the hot zone moves to surround the product basket.
Merkmal
Modell | Thermische Prüfkammer (2 Zonen) | TST-49(A-C) | TST-80(A-C) | TST-150(A-C) | TST-252(A-C) | TST-450(A-C) | TST-900(A-C) |
Innenmaß BxHxT (mm) | 400x350x350 | 500x400x400 | 600x500x500 | 700x600x600 | 800x750x750 | 1000x900x900 | |
Außenmaß BxHxT (mm) | 1400x1800x1400 | 1550x1950x1550 | 1600x1200x1700 | 1700x2100x1750 | 1800x2200x1900 | 2100x2400x2200 | |
Temperaturbereich der Testzone | Typ A: -40 °C ~ + 150 °C (200°C ist optional) | Typ B: -55 °C ~ + 150 °C (200°C ist optional) | Typ C: -65 °C ~ + 150 °C (200 °C ist optional) | ||||
(Hochtemperaturbereich der Testzone: +60 °C ~ + 150 °C (200 °C optional); Niedriger Temperaturbereich der Prüfzone: -10 °C ~ -40 °C / -55 °C / -65 °C) | |||||||
Belichtungszeit von Hoch-/Niedrigtemperatur | Belichtungszeit der hohen Temperatur: +60 °C ~ + 150 °C (200 °C ist optional) 30 Minuten | ||||||
Expositionszeit bei niedriger Temperatur: Typ A: -10 °C ~ -40 °C / Typ B -55 °C / Typ C -65 °C 30 Minuten | |||||||
Temperatur des wärmespeichernden Schlitzes/ Aufheizzeit | RT~200°C / ca. 45 Minuten | ||||||
Temperatur des Kühlsteckplatzes/ Abkühlzeit | RT~75°C / ca. 100 Minuten | ||||||
Temperatur-Erholungszeit/ Konvertierungszeit | ≤5min/≤5sec | ||||||
Präzise Temperaturregelung/ Genauigkeit der Verteilung | ±0,5 °C/±2 °C | ||||||
Kühlsystem | Halbhermetischer zweistufiger Kompressor (wassergekühlter Typ) Hermetischer zweistufiger Kompressor (luftgekühlter Typ) | ||||||
Zubehör | Sichtfenster (spezielle Möglichkeit) | ||||||
Kompressor | Französische Marke "Tecumseh", deutsche Marke "Bitzer" | ||||||
Macht | AC380V: 3phasig 5 Leitungen: 50/60HZ | ||||||
Ungefähres Gewicht (kg) | 450 | 600 | 750 | 900 | 1300 | 1500 |